Industrial Electrician & Electrical Contractor
Los Angeles, CA
Same-day consultation. When your line goes down in Los Angeles, you don't need a contractor who schedules a walkthrough for next week. You need someone who picks up, shows up, and knows what they're looking at — electrical, controls, mechanical, all of it. Based in Santa Fe Springs, minutes from your facility. 24/7 emergency response for existing clients.
Get a Same-Day Consultation
Fast response guaranteed. Tell us what's going on — we'll call you back today.
Trusted by industry leaders
Direct Source serves Southern California’s top manufacturers
What We Fix
Industrial Electrical Problems We Solve in Los Angeles
Most facilities don't have time for a two-visit diagnosis. We come in, we find it, we fix it — electrical, controls, and mechanical on the same truck. Here's what we handle most often.
Emergency Troubleshooting & Repair
Power loss, tripping breakers, dead equipment, intermittent faults in Los Angeles. We isolate the root cause fast and get your line running.
Available 24/7 for Los Angeles Canyon and Los Angeles County industrial facilities. NFPA 70E compliant procedures on every emergency call.
PLC & Controls Repair
PLC faults, HMI failures, drive errors, and control circuit problems — Allen-Bradley, Siemens, SEW and more.
We handle ladder logic review, I/O troubleshooting, communication faults, and full PLC programming. One technician for controls and power — not two separate contractors.
VFD & Motor Repair
VFD fault diagnosis, motor replacement, drive programming, and rotating equipment electrical repair.
We carry common drive parts on the truck and work on most major brands. Power quality analysis included when drive failures are recurring.
MCC & Panel Work
Motor control center repair, breaker replacement, bucket rebuilds, panel upgrades, and switchgear service.
We handle load calculations, permit coordination with the Los Angeles Building Division, and Title 24 compliance documentation for panel upgrades and new installs.
Equipment Installation & Wiring
New equipment hookups, relocations, conveyor systems, and production line electrical installs done right.
From single machine connections to full production line buildouts, we handle the electrical scope start to finish. No sub-contractors, no handoffs.
Preventive Maintenance Programs
EPM programs, IR inspections, arc flash studies, and transformer service that prevent the 2am phone call.
Custom-built maintenance schedules for Los Angeles manufacturing facilities. Includes infrared thermal imaging reports, arc flash hazard documentation, and NFPA 70E safety audits.
Why Direct Source
One Call Solves the Whole Problem
Same-Day Consultation
Call before noon and we'll have eyes on your Los Angeles facility today — not next week. Most contractors make you wait days for a walkthrough.
Electrical + Mechanical + Controls Under One Roof
Most electricians stop at the panel. We handle the motor, the drive, the PLC, and the pump too — no finger-pointing between trades.
Based in the Industrial Corridor
Santa Fe Springs headquarters puts us minutes from Los Angeles and the entire Los Angeles County manufacturing belt.
Industrial Only — No Residential
We work plants, warehouses, and processing facilities exclusively. Your facility isn't a side job between house calls.
Direct Source by the Numbers
How It Works
From First Call to Fixed — Fast
We cut out the back-and-forth. You call, we respond same day, you get a straight answer on what it costs and how long it takes. No runaround.
Call or Submit
Tell us what's down or what you need. A real person responds — fast.
Same-Day Consultation
We get eyes on the problem today, by phone or on-site at your Los Angeles facility.
Clear Plan & Pricing
Straight answers on what it takes to fix it — scope, timeline, cost.
We Fix It
Our own crews do the work — electrical, mechanical, and controls.
Who We Serve
Industries We Serve in Los Angeles, CA
Los Angeles's industrial economy runs across aerospace, food production, logistics, and electronics manufacturing. Every sector has its own electrical demands. We know them all.
Oil & Gas
Oil and gas support facilities, compressor stations, and processing operations in Southern California require electrical contractors who understand hazardous location wiring, Class I Division standards, and the documentation those environments demand. We handle instrumentation power, motor controls, and emergency electrical for these facilities.
Metal Fabrication & Finishing
Metal fabrication shops and finishing operations run heavy equipment — welders, CNC machines, electroplating lines, and ventilation systems — that place serious demands on electrical infrastructure. We handle high-amperage panel work, equipment wiring, and motor drive replacements for fabrication facilities throughout Los Angeles and Los Angeles County.
Aerospace & Defense
Los Angeles Canyon hosts a concentration of aerospace suppliers and defense subcontractors with strict documentation and quality requirements. We provide electrical installation, control system work, and maintenance programs that meet the standards these facilities demand — clean, documented, and done right the first time.
Food & Beverage Production
Food and beverage facilities in Los Angeles run wash-down environments, refrigeration systems, and continuous production lines that cannot tolerate unplanned downtime. We handle motor and drive failures, panel work, and electrical installs with the sanitation and safety standards these operations require.
Logistics & Distribution
With access to I-5, SR-91, and SR-57, Los Angeles is a major distribution hub. Warehouse and distribution facilities need reliable conveyor electrical, lighting systems, and dock equipment wiring. We support distribution operations of all sizes with fast response and minimal disruption.
Electronics & General Manufacturing
Electronics assembly and general manufacturing in Los Angeles run precise, automated processes that depend on clean power and reliable controls. We troubleshoot automation faults, upgrade aging electrical infrastructure, and provide preventive maintenance programs that keep production running on schedule.
Cold Storage & Refrigeration
Cold storage facilities operate compressors, evaporators, and refrigeration equipment around the clock. Electrical faults in these environments are not just costly — they can mean product loss. We respond fast, diagnose correctly, and fix it the same day when possible.
Plastics & Packaging
Plastics and packaging operations in Los Angeles rely on injection molding machines, extruders, and packaging lines that demand consistent power and responsive controls. We handle VFD replacements, machine wiring, and controls work for these facilities across Los Angeles County.
What Clients Say
Trusted by Los Angeles & Los Angeles County Manufacturers
“We were experiencing electrical and PLC problems at our manufacturing plant and needed help ASAP. Direct Source came in the same day, gave us a very fair estimate, found the problem, and fixed it. We got back up and running with little downtime. These guys know what they're doing.”
“We had an unexpected production issue at our facility in Los Angeles and Direct Source responded quickly. Their industrial electrician team diagnosed the problem fast and got us back up and running the same day. Professional and dependable.”
“They were professional and prompt, diagnosed the issue quickly, and fixed it at no charge since it was an easy fix. That type of customer service goes a long way in showing how they operate. They will be our FIRST call for the next electrical need.”
Serving Los Angeles, CA
Industrial Electrician & Electrical Contractor in Los Angeles, CA
Los Angeles has one of the largest and most diverse industrial bases in the country — garment and textile manufacturing in the Fashion District, cold storage and food processing along Alameda Street, distribution and logistics near the railyards, and heavy industrial operations clustered in zip codes 90001, 90011, 90021, 90023, and 90058. These facilities run around the clock and need electrical contractors who understand industrial equipment, not contractors who spend the day on tract homes.
Direct Source Industrial Solutions serves the Los Angeles industrial corridor from our Santa Fe Springs headquarters. Our technicians work industrial every day — motor controls, drives, PLCs, MCC work, panel upgrades, and emergency electrical service for manufacturing, cold storage, and distribution facilities throughout the city. We understand Title 24 compliance, NFPA 70E arc flash requirements, and the speed that LA production facilities require. We also serve nearby Vernon, Commerce, Huntington Park, and South Gate. Zip codes served: 90001–90058.
Tell Us What’s Going On
Submit below and our team will reach out today.
FAQ
Frequently Asked Questions — Industrial Electrician Los Angeles
How fast can you get to my facility in Los Angeles?
Direct Source is headquartered in Santa Fe Springs, close to Los Angeles’s industrial zones. For most Los Angeles facilities (90001–90058) we’re often on-site within 1–2 hours. For emergencies, we respond 24/7, 365 days a year.
What industrial electrical services do you offer in Los Angeles?
We offer emergency troubleshooting, PLC & controls repair, VFD & motor repair, MCC & panel repair, machine and equipment wiring, arc flash studies, and preventive maintenance programs — all for industrial and manufacturing facilities in Los Angeles, CA.
Do you handle PLC and automation work in Los Angeles?
Yes. Our team troubleshoots and repairs PLCs, VFDs, HMIs, and drives — Allen-Bradley, Siemens, and SEW brands — alongside power distribution, motors, and mechanical systems. One contractor for the whole problem.
What does “same-day consultation” mean?
It means we get eyes on your problem the day you call — by phone with a qualified technician, or on-site when needed. You won’t wait days just to talk to someone who actually understands industrial systems.
Can you set up a preventive maintenance program for my Los Angeles facility?
Yes. We build custom EPM programs — infrared inspections, transformer service, arc flash studies, and scheduled maintenance — designed to prevent unplanned downtime at Los Angeles manufacturing facilities.
Do you work on residential or commercial buildings?
We’re primarily industrial — manufacturing plants, processing facilities, warehouses, heavy industrial operations. We do take on some commercial work depending on the scope, but we don’t do residential. Not sure if your project fits? Just call us.
Are you licensed and insured for industrial electrical work in Los Angeles?
Yes — fully licensed and insured for industrial electrical work throughout California, including Los Angeles and all of Los Angeles County. CA C10 License #1008512. Documentation available on request.
Your Facility Can’t Wait. Neither Do We.
Call now for a same-day consultation in Los Angeles, or submit the form and we'll reach out today.