Oilfield Electrical Contractor
Los Angeles
The Los Angeles Basin still produces oil — and those operations need qualified electrical contractors who understand the environment. Direct Source serves oilfield operations across LA.
Request a Quote
Same-day response. Tell us about your facility — we'll get back to you today.
Trusted by industry leaders
Direct Source serves Southern California’s top manufacturers
What We Do
Oilfield Electrical Contractor
Oilfield electrical services for Los Angeles Basin production operations.
Wellhead Electrical
Wellhead control panel installation and maintenance, polished rod sensor wiring, shutdown system electrical, and all wellhead wiring in Class I Division 1 and Division 2 classified areas across LA Basin oilfield operations.
Explosion-proof conduit and fittings throughout. Documented to NEC Article 500.
Pump Jack Controls
Motor control panel installation and maintenance, VFD commissioning for beam pumps, soft starter service, overload protection calibration, and motor replacement for pump jack drives in LA oilfield applications.
When your pump jack trips, we respond fast — lost pump time is lost production.
SCADA & RTU
RTU installation and maintenance, SCADA communication wiring, remote well monitoring panels, solar power maintenance for remote wellhead RTUs, and telemetry infrastructure for LA Basin oil production monitoring.
Keeps your production data current and alarms active across your well field.
Tank Battery Electrical
Level sensor wiring, tank battery control panels, production facility lighting and utility power, cathodic protection support, and explosion-proof electrical throughout classified tank battery areas.
Tank battery electrical done right, documented, and ready for inspection.
Class I Division 1 Installations
All oilfield electrical areas require hazardous location wiring. Our electricians are Class I Division 1 certified — explosion-proof conduit, intrinsically safe circuits, and ATEX enclosures installed correctly in LA Basin oilfield environments.
We do not substitute Division 2 methods where Division 1 is required.
Oilfield Mechanical Support
Pump and compressor mechanical maintenance, pump jack gearbox support, belt and sheave inspection, alignment, and rotating equipment PM for LA Basin oil production facilities.
Electrical and mechanical under one contractor. Less coordination for your team.
Why Direct Source
A Local Oilfield Electrical Contractor — Not a Refinery Shop
Based in the LA Basin oil corridor
Our shop is on Telegraph Road in Santa Fe Springs — in the middle of the Whittier oil field. We are minutes from active production sites in Santa Fe Springs, Whittier, Signal Hill, and Long Beach. Fast response when something goes down.
We work in production environments, not just refineries
A lot of industrial electrical contractors in SoCal focus on refineries and petrochemical plants. We work in upstream production environments — wellheads, pump jacks, tank batteries, SCADA panels. That's a different world and we know it.
Class I Division 1 throughout
Every oilfield site has classified areas. Our electricians are certified for Class I Division 1 and Division 2 work — the right conduit, the right fittings, the right enclosures, correctly installed.
24/7 emergency response
Production doesn't have business hours. We maintain 24/7 availability for oilfield electrical emergencies across the LA Basin. Direct line to a technician — not a dispatcher.
Direct Source at a Glance
Overview
Oil production in the Los Angeles Basin is still active — from urban drill sites in downtown LA to the Whittier field in Santa Fe Springs, Signal Hill, Long Beach, and Huntington Beach coastal operations. These sites need electricians who understand oilfield environments: classified area wiring, pump jack controls, wellhead panels, tank battery electrical, and SCADA/RTU systems. Direct Source is an oilfield electrical contractor based in Santa Fe Springs — in the middle of the LA Basin oil production corridor — providing electrical and mechanical services to production operators across Los Angeles County.
Cities served: Santa Fe Springs, Whittier, Long Beach, Signal Hill, Huntington Beach, downtown Los Angeles, and all LA Basin oil production areas. View our SoCal oil & gas hub →
Overview
Oil production in the Los Angeles Basin is still active — from urban drill sites in downtown LA to the Whittier field in Santa Fe Springs, Signal Hill, Long Beach, and Huntington Beach coastal operations. These sites need electricians who understand oilfield environments: classified area wiring, pump jack controls, wellhead panels, tank battery electrical, and SCADA/RTU systems. Direct Source is an oilfield electrical contractor based in Santa Fe Springs — in the middle of the LA Basin oil production corridor — providing electrical and mechanical services to production operators across Los Angeles County.
Cities served: Santa Fe Springs, Whittier, Long Beach, Signal Hill, Huntington Beach, downtown Los Angeles, and all LA Basin oil production areas. View our SoCal oil & gas hub →
Overview
Oil production in the Los Angeles Basin is still active — from urban drill sites in downtown LA to the Whittier field in Santa Fe Springs, Signal Hill, Long Beach, and Huntington Beach coastal operations. These sites need electricians who understand oilfield environments: classified area wiring, pump jack controls, wellhead panels, tank battery electrical, and SCADA/RTU systems. Direct Source is an oilfield electrical contractor based in Santa Fe Springs — in the middle of the LA Basin oil production corridor — providing electrical and mechanical services to production operators across Los Angeles County.
Cities served: Santa Fe Springs, Whittier, Long Beach, Signal Hill, Huntington Beach, downtown Los Angeles, and all LA Basin oil production areas. View our SoCal oil & gas hub →
Overview
Oil production in the Los Angeles Basin is still active — from urban drill sites in downtown LA to the Whittier field in Santa Fe Springs, Signal Hill, Long Beach, and Huntington Beach coastal operations. These sites need electricians who understand oilfield environments: classified area wiring, pump jack controls, wellhead panels, tank battery electrical, and SCADA/RTU systems. Direct Source is an oilfield electrical contractor based in Santa Fe Springs — in the middle of the LA Basin oil production corridor — providing electrical and mechanical services to production operators across Los Angeles County.
Cities served: Santa Fe Springs, Whittier, Long Beach, Signal Hill, Huntington Beach, downtown Los Angeles, and all LA Basin oil production areas. View our SoCal oil & gas hub →
Get Started
Request a Quote
- Same-day response
- Class I Division 1 certified
- ISNetworld prequalified
- 24/7 emergency response
Tell Us About Your Facility
We respond same day.
FAQ
Frequently Asked Questions
Do you work on active oilfield sites in Los Angeles?
Yes. We work on active oil production sites across the Los Angeles Basin — including urban production sites in the city of Los Angeles, the Whittier oil field in Santa Fe Springs, Signal Hill, Long Beach, and Huntington Beach coastal operations. Our shop is in Santa Fe Springs, central to the LA Basin production corridor.
Are you qualified for Class I Division 1 work at oilfield sites?
Yes. Our electricians are certified for Class I Division 1 and Division 2 hazardous location work — explosion-proof conduit and fittings, intrinsically safe circuits, ATEX-rated enclosures. All oilfield electrical installations are documented to NEC Article 500 standards.
Can you maintain pump jack motor controls and VFDs?
Yes. We install, commission, and maintain motor control panels, VFDs, and soft starters for beam pump applications. When a pump jack trips or a drive faults, we diagnose the root cause — not just reset and move on.
Do you handle SCADA and RTU work for production wells?
Yes. We install and maintain RTUs, wire SCADA communications, service remote monitoring panels, and maintain solar power systems for remote wellhead RTUs across LA Basin production sites.
What is your response time for oilfield electrical emergencies in Los Angeles?
Our shop is in Santa Fe Springs — typically 20–40 minutes to most LA Basin production sites. We maintain 24/7 availability for electrical emergencies. Call (562) 396-9924 and you reach a technician directly.
Ready to Work in Your Facility?
Class I Division 1. ISNetworld prequalified. Electrical, controls & mechanical under one roof. Available 24/7.