LA County · Licensed & Insured · 24/7

Industrial Electrical Contractor
Pico Rivera, CA

Fixed-price after a site walkdown. When your panel needs upgrading, your MCC is due for a retrofit, or your AB PLC is end-of-life, you need a contractor who scopes it on-site and gives you a number you can approve — not an hourly rate and a crew that bills until it's done. Based in Santa Fe Springs, serving Pico Rivera and all of Los Angeles County. ISNetworld pre-qualified. CA C-10 licensed.

Fixed-price proposals ISNetworld pre-qualified On-site from walkdown through startup

Request a Project Quote

Same-day response. We scope at your facility before any proposal leaves our hands.

Emergency in Pico Rivera? Don't fill out a form.Call (562) 396-9924
Licensed, Bonded & Insured
CA C-10 · LIC #1068512
OSHA Compliant
Safety-first on every job
ISNetworld Member
ISNetworld Pre-Qualified
Safety & compliance verified

What We Build & Install

Industrial Electrical Projects We Deliver in Pico Rivera

Pico Rivera industrial facilities need a contractor who scopes on-site, gives a fixed price, and shows up with the right crew — electrical and controls, start to finish.

Panel & Service Upgrades

Main service upgrades, subpanel additions, feeder replacements, and NEC-compliant power distribution for Pico Rivera manufacturing and distribution facilities.

Load calculations, permit coordination, and Title 24 documentation included. Fixed price after an on-site walkdown.

MCC Retrofit & Replacement

Motor control center replacements, bucket swaps, breaker upgrades, VFD integration, and NEC-compliant bus work at Pico Rivera plants and facilities.

Planned outage scheduling to minimize production impact. Same crew from walkdown through energization and startup.

AB / PLC Migration & Controls

SLC-500, PLC-5, and MicroLogix end-of-life upgrades to ControlLogix and CompactLogix — program conversion, I/O mapping, and startup at Pico Rivera facilities.

Ladder logic conversion, HMI screen migration, and full documentation. One contractor for controls and power.

VFD & HMI Installation

Drive sizing, parameter configuration, PID tuning, HMI screen development, bypass panels, and VFD commissioning for Pico Rivera industrial facilities.

We carry common drive parts and work on most major brands. Power quality analysis included on repeat drive failures.

Instrumentation & Field Wiring

Sensor hookups, I/O terminations, junction box builds, conduit runs, and field wiring for new equipment, expansions, and AB migration projects at Pico Rivera facilities.

From single instrument loops to full production line buildouts. No subcontractors — our field crew handles it start to finish.

Pre-Construction Electrical Planning

Load studies, panel sizing, conduit routing plans, and electrical coordination with GCs before new equipment arrives or facility expansions start at Pico Rivera industrial sites.

Prevents costly change orders on the floor. We scope the electrical requirements before construction begins — not after the walls are up.

Emergency Electrical Response

24/7 emergency response for production-down electrical failures at Pico Rivera industrial facilities — panel faults, motor failures, PLC crashes, and MCC trips.

We carry diagnostic equipment and common spare parts on the truck. Most Los Angeles County facilities reachable within 1–2 hours from our Santa Fe Springs base.

Motor Testing & Replacement

Motor testing, vibration analysis, insulation resistance testing, bearing replacement, and motor changeouts for Pico Rivera manufacturing and processing facilities.

We test in-place before recommending a replacement. When replacement is needed, we handle the electrical disconnect and startup of the new unit.

Power Quality & Electrical Audits

Power quality surveys, harmonic analysis, load studies, infrared thermal scanning, and electrical system assessments for Pico Rivera industrial facilities.

Most recurring drive failures, nuisance tripping, and overheating issues trace back to upstream power quality problems. We find the source — not just the symptom.

Why Direct Source

One Contractor. Fixed Price. On-Site Throughout.

We scope at your Pico Rivera facility before any number leaves our mouths

Every proposal follows a site walkdown. You get a fixed price you can approve — not an hourly rate and a hope. No change orders for scope we should have caught on the walkdown.

Electrical + Controls — same crew, same truck

Most electricians stop at the panel. We handle the drive, the PLC, the instrumentation, and the I/O too — one contractor from power to controls, no finger-pointing on your Pico Rivera facility floor.

Based 30–60 minutes from most Los Angeles County facilities

We're in Santa Fe Springs — quick access to the Pico Rivera industrial district along Washington Blvd and the I-605 corridor. When you call for a walkdown or an emergency, you're not waiting on a crew flying in from the other side of the state.

Industrial electrical work in Pico Rivera

Direct Source by the Numbers

24/7
Emergency response, 365 days
C-10
CA licensed electrical contractor
ISN
ISNetworld pre-qualified
E+C
Electrical & controls in one team

How It Works

From First Call to Fixed — Fast

STEP 1

Call or Submit

Tell us what you need. A real person responds — fast. Not a scheduling queue or a 3-day callback.

STEP 2

Site Walkdown

We come to your Pico Rivera facility, see the scope with our own eyes, and talk to the people who run the equipment.

STEP 3

Fixed-Price Proposal

Straight answer on scope, timeline, and cost. You approve it. We don't start until you do.

STEP 4

We Build It

Our own crews do the work — electrical and controls. Same people from walkdown through startup and documentation.

Who We Serve

Industries We Serve in Pico Rivera, CA

Pico Rivera industrial activity includes automotive, food processing, metals, plastics, and distribution — each with its own electrical demands. We know all of them.

Food Processing & Cold Storage

Motor controls, refrigeration electrical, VFD replacements, and panel work with the sanitation standards these environments require.

Distribution & Warehousing

Conveyor electrical, lighting retrofits, dock equipment wiring, and panel capacity for expanding operations throughout Pico Rivera.

Metal Fabrication & Manufacturing

High-amperage panel work, equipment wiring, motor drive replacements, and controls in Pico Rivera and the surrounding Los Angeles County corridor.

Plastics, Packaging & Converting

VFD replacements, machine wiring, MCC retrofits, and AB/PLC migrations for plastics facilities throughout Los Angeles County.

Aerospace & Defense

Precision documentation, clean installations, and controls capability — meeting the standards aerospace subcontractors require in Pico Rivera.

Oil Production Support

Hazardous location wiring, Class I Division standards, instrumentation power, motor controls, and panel work for field and plant facilities near Pico Rivera.

What Clients Say

Trusted by Pico Rivera Industrial Facilities

★★★★★

"We were experiencing electrical and PLC problems at our manufacturing plant and needed help ASAP. Direct Source came in the same day, gave us a very fair estimate, found the problem, and fixed it. We got back up and running with little downtime. These guys know what they're doing."

Cliff S. — Manufacturing Plant, Vernon CA · Google Review
★★★★★

"We had an unexpected production issue at our facility and Direct Source responded quickly. Their team diagnosed the problem fast and got us back up and running the same day. Professional and dependable — exactly what you need when production is down."

Gemie N. — Industrial Facility, Southern California · Google Review
★★★★★

"They were professional and prompt, diagnosed the issue quickly, and fixed it at no charge since it was an easy fix. That type of customer service goes a long way in showing how they operate. They will be our FIRST call for the next electrical need."

Jason R. — Local Guide, Los Angeles Area · Google Review

Serving PICO RIVERA, CA

Industrial Electrical Contractor in Pico Rivera — Every Industrial Corridor

Direct Source is based in Santa Fe Springs — quick access to the Pico Rivera industrial district along Washington Blvd and the I-605 corridor. We serve Pico Rivera facilities with fixed-price proposals after a site walkdown, ISNetworld pre-qualification, and crews that cover electrical and controls in one team.

Whether it's a panel upgrade at a food plant on Whittier, an MCC retrofit at a distribution facility, or an emergency PLC failure at 2am — we're the call that Pico Rivera facility managers make when downtime is not an option.

WhittierDowneyMontebelloSanta Fe SpringsPico Rivera

Zip codes served: 90660 and surrounding Los Angeles County areas.

Get Started

Request Your Site Walkdown & Fixed-Price Proposal

  • Scoped at your Pico Rivera facility — before any number leaves our hands
  • Fixed price — no open-ended hourly billing
  • Electrical & controls expertise in one team
  • ISNetworld pre-qualified — ready for vetted Pico Rivera facilities
Prefer to Talk? (562) 396-9924

Project Request — Pico Rivera

Submit below and our team will reach out today

FAQ

Frequently Asked Questions — Industrial Electrical Contractor Pico Rivera

What's the difference between an industrial electrician and an industrial electrical contractor?

An industrial electrician is a tradesperson — licensed to perform electrical work under a contractor's supervision. An industrial electrical contractor is a licensed business entity (CA C-10 license) that is bonded, insured, and legally accountable for the full project scope, schedule, and documentation. Pico Rivera facility managers, procurement teams, and EHS departments typically require a licensed contractor on record for panel upgrades, MCC retrofits, controls projects, and PM programs.

Do you provide fixed-price proposals for Pico Rivera industrial projects?

Yes. Every project starts with a site walkdown at your Pico Rivera facility. We scope the work in person — talking to the people who run the equipment, not just reading a work order — and deliver a fixed-price proposal you approve before we start. No hourly billing, no change orders for scope we should have seen during the walkdown.

Are you ISNetworld pre-qualified for Pico Rivera facilities?

Yes. We maintain current ISNetworld pre-qualification with up-to-date OSHA 30 documentation, CA C-10 license verification, insurance certificates, and safety records. If your Pico Rivera facility requires contractor vetting before site access, we're already in the system. Documentation is available on request for facilities with additional requirements.

How quickly can you respond to a project request in Pico Rivera?

We respond to all project requests within 1 business hour. For site walkdowns at Pico Rivera facilities, we're typically on-site same day or next day. For emergency electrical and controls failures at existing client facilities, we respond 24/7, 365 days a year — often within 1–2 hours to most Los Angeles County locations from our Santa Fe Springs base.

Do you handle both electrical and controls work at Pico Rivera facilities?

Yes. Direct Source handles industrial electrical and controls work together — AB/PLC migrations, MCC retrofits, VFD and HMI installation and programming, instrumentation and field wiring, motor testing, and panel upgrades. One contractor for power and controls at your Pico Rivera facility. No subcontracting, no coordination gap between electrical and automation.

Are you licensed and insured for industrial electrical work in Pico Rivera?

Yes — CA C-10 Electrical Contractor LIC #1068512, fully bonded and insured for industrial electrical work throughout California, including Pico Rivera and Los Angeles County. OSHA 30 compliant. ISNetworld pre-qualified. All documentation available on request.

Pico Rivera Industrial Facilities Can't Wait. Neither Do We.

Call now for a same-day site walkdown in Pico Rivera, or submit the form and we'll reach out today.