Industrial Electrical Contractor
San Bernardino, CA
Fixed-price after a site walkdown. When your panel needs upgrading, your MCC is due for a retrofit, or your AB PLC is end-of-life, you need a contractor who scopes it on-site and gives you a number you can approve — not an hourly rate and a crew that bills until it's done. Based in Santa Fe Springs, serving San Bernardino and all of San Bernardino County. ISNetworld pre-qualified. CA C-10 licensed.
Request a Project Quote
Same-day response. We scope at your facility before any proposal leaves our hands.

What We Build & Install
Industrial Electrical Projects We Deliver in San Bernardino
San Bernardino industrial facilities need a contractor who scopes on-site, gives a fixed price, and shows up with the right crew — electrical and controls, start to finish.
Panel & Service Upgrades
Main service upgrades, subpanel additions, feeder replacements, and NEC-compliant power distribution for San Bernardino manufacturing and distribution facilities.
Load calculations, permit coordination, and Title 24 documentation included. Fixed price after an on-site walkdown.
MCC Retrofit & Replacement
Motor control center replacements, bucket swaps, breaker upgrades, VFD integration, and NEC-compliant bus work at San Bernardino plants and facilities.
Planned outage scheduling to minimize production impact. Same crew from walkdown through energization and startup.
AB / PLC Migration & Controls
SLC-500, PLC-5, and MicroLogix end-of-life upgrades to ControlLogix and CompactLogix — program conversion, I/O mapping, and startup at San Bernardino facilities.
Ladder logic conversion, HMI screen migration, and full documentation. One contractor for controls and power.
VFD & HMI Installation
Drive sizing, parameter configuration, PID tuning, HMI screen development, bypass panels, and VFD commissioning for San Bernardino industrial facilities.
We carry common drive parts and work on most major brands. Power quality analysis included on repeat drive failures.
Instrumentation & Field Wiring
Sensor hookups, I/O terminations, junction box builds, conduit runs, and field wiring for new equipment, expansions, and AB migration projects at San Bernardino facilities.
From single instrument loops to full production line buildouts. No subcontractors — our field crew handles it start to finish.
Pre-Construction Electrical Planning
Load studies, panel sizing, conduit routing plans, and electrical coordination with GCs before new equipment arrives or facility expansions start at San Bernardino industrial sites.
Prevents costly change orders on the floor. We scope the electrical requirements before construction begins — not after the walls are up.
Emergency Electrical Response
24/7 emergency response for production-down electrical failures at San Bernardino industrial facilities — panel faults, motor failures, PLC crashes, and MCC trips.
We carry diagnostic equipment and common spare parts on the truck. Most San Bernardino County facilities reachable within 1–2 hours from our Santa Fe Springs base.
Motor Testing & Replacement
Motor testing, vibration analysis, insulation resistance testing, bearing replacement, and motor changeouts for San Bernardino manufacturing and processing facilities.
We test in-place before recommending a replacement. When replacement is needed, we handle the electrical disconnect and startup of the new unit.
Power Quality & Electrical Audits
Power quality surveys, harmonic analysis, load studies, infrared thermal scanning, and electrical system assessments for San Bernardino industrial facilities.
Most recurring drive failures, nuisance tripping, and overheating issues trace back to upstream power quality problems. We find the source — not just the symptom.
Why Direct Source
One Contractor. Fixed Price. On-Site Throughout.
We scope at your San Bernardino facility before any number leaves our mouths
Every proposal follows a site walkdown. You get a fixed price you can approve — not an hourly rate and a hope. No change orders for scope we should have caught on the walkdown.
Electrical + Controls — same crew, same truck
Most electricians stop at the panel. We handle the drive, the PLC, the instrumentation, and the I/O too — one contractor from power to controls, no finger-pointing on your San Bernardino facility floor.
Based 30–60 minutes from most San Bernardino County facilities
We're in Santa Fe Springs — quick access to the San Bernardino industrial corridor along Tippecanoe Ave, the I-10, and the I-215. When you call for a walkdown or an emergency, you're not waiting on a crew flying in from the other side of the state.
Direct Source by the Numbers
How It Works
From First Call to Fixed — Fast
Call or Submit
Tell us what you need. A real person responds — fast. Not a scheduling queue or a 3-day callback.
Site Walkdown
We come to your San Bernardino facility, see the scope with our own eyes, and talk to the people who run the equipment.
Fixed-Price Proposal
Straight answer on scope, timeline, and cost. You approve it. We don't start until you do.
We Build It
Our own crews do the work — electrical and controls. Same people from walkdown through startup and documentation.
Who We Serve
Industries We Serve in San Bernardino, CA
San Bernardino industrial activity includes logistics, food processing, metals, distribution, and light manufacturing — each with its own electrical demands. We know all of them.
Food Processing & Cold Storage
Motor controls, refrigeration electrical, VFD replacements, and panel work with the sanitation standards these environments require.
Distribution & Warehousing
Conveyor electrical, lighting retrofits, dock equipment wiring, and panel capacity for expanding operations throughout San Bernardino.
Metal Fabrication & Manufacturing
High-amperage panel work, equipment wiring, motor drive replacements, and controls in San Bernardino and the surrounding San Bernardino County corridor.
Plastics, Packaging & Converting
VFD replacements, machine wiring, MCC retrofits, and AB/PLC migrations for plastics facilities throughout San Bernardino County.
Aerospace & Defense
Precision documentation, clean installations, and controls capability — meeting the standards aerospace subcontractors require in San Bernardino.
Oil Production Support
Hazardous location wiring, Class I Division standards, instrumentation power, motor controls, and panel work for field and plant facilities near San Bernardino.
What Clients Say
Trusted by San Bernardino Industrial Facilities
"We were experiencing electrical and PLC problems at our manufacturing plant and needed help ASAP. Direct Source came in the same day, gave us a very fair estimate, found the problem, and fixed it. We got back up and running with little downtime. These guys know what they're doing."
"We had an unexpected production issue at our facility and Direct Source responded quickly. Their team diagnosed the problem fast and got us back up and running the same day. Professional and dependable — exactly what you need when production is down."
"They were professional and prompt, diagnosed the issue quickly, and fixed it at no charge since it was an easy fix. That type of customer service goes a long way in showing how they operate. They will be our FIRST call for the next electrical need."
Serving SAN BERNARDINO, CA
Industrial Electrical Contractor in San Bernardino — Every Industrial Corridor
Direct Source is based in Santa Fe Springs — quick access to the San Bernardino industrial corridor along Tippecanoe Ave, the I-10, and the I-215. We serve San Bernardino facilities with fixed-price proposals after a site walkdown, ISNetworld pre-qualification, and crews that cover electrical and controls in one team.
Whether it's a panel upgrade at a food plant on Colton, an MCC retrofit at a distribution facility, or an emergency PLC failure at 2am — we're the call that San Bernardino facility managers make when downtime is not an option.
Zip codes served: 92401, 92404, 92405, 92407, 92408, 92410 and surrounding San Bernardino County areas.
Get Started
Request Your Site Walkdown & Fixed-Price Proposal
- Scoped at your San Bernardino facility — before any number leaves our hands
- Fixed price — no open-ended hourly billing
- Electrical & controls expertise in one team
- ISNetworld pre-qualified — ready for vetted San Bernardino facilities
Project Request — San Bernardino
Submit below and our team will reach out today
FAQ
Frequently Asked Questions — Industrial Electrical Contractor San Bernardino
What's the difference between an industrial electrician and an industrial electrical contractor?
An industrial electrician is a tradesperson — licensed to perform electrical work under a contractor's supervision. An industrial electrical contractor is a licensed business entity (CA C-10 license) that is bonded, insured, and legally accountable for the full project scope, schedule, and documentation. San Bernardino facility managers, procurement teams, and EHS departments typically require a licensed contractor on record for panel upgrades, MCC retrofits, controls projects, and PM programs.
Do you provide fixed-price proposals for San Bernardino industrial projects?
Yes. Every project starts with a site walkdown at your San Bernardino facility. We scope the work in person — talking to the people who run the equipment, not just reading a work order — and deliver a fixed-price proposal you approve before we start. No hourly billing, no change orders for scope we should have seen during the walkdown.
Are you ISNetworld pre-qualified for San Bernardino facilities?
Yes. We maintain current ISNetworld pre-qualification with up-to-date OSHA 30 documentation, CA C-10 license verification, insurance certificates, and safety records. If your San Bernardino facility requires contractor vetting before site access, we're already in the system. Documentation is available on request for facilities with additional requirements.
How quickly can you respond to a project request in San Bernardino?
We respond to all project requests within 1 business hour. For site walkdowns at San Bernardino facilities, we're typically on-site same day or next day. For emergency electrical and controls failures at existing client facilities, we respond 24/7, 365 days a year — often within 1–2 hours to most San Bernardino County locations from our Santa Fe Springs base.
Do you handle both electrical and controls work at San Bernardino facilities?
Yes. Direct Source handles industrial electrical and controls work together — AB/PLC migrations, MCC retrofits, VFD and HMI installation and programming, instrumentation and field wiring, motor testing, and panel upgrades. One contractor for power and controls at your San Bernardino facility. No subcontracting, no coordination gap between electrical and automation.
Are you licensed and insured for industrial electrical work in San Bernardino?
Yes — CA C-10 Electrical Contractor LIC #1068512, fully bonded and insured for industrial electrical work throughout California, including San Bernardino and San Bernardino County. OSHA 30 compliant. ISNetworld pre-qualified. All documentation available on request.
San Bernardino Industrial Facilities Can't Wait. Neither Do We.
Call now for a same-day site walkdown in San Bernardino, or submit the form and we'll reach out today.