Same-day consultation. When your line goes down in Orange County, you don't need a contractor who schedules a walkthrough for next week. You need someone who picks up, shows up, and knows what they're looking at — electrical, controls, mechanical, all of it. Based in Santa Fe Springs, minutes from your facility. 24/7 emergency response for existing clients.
Fast response guaranteed. Tell us what's going on — we'll call you back today.
Trusted by industry leaders
What We Fix
Most facilities don't have time for a two-visit diagnosis. We come in, we find it, we fix it — electrical, controls, and mechanical on the same truck. Here's what we handle most often.
Power loss, tripping breakers, dead equipment, intermittent faults in Orange County. We isolate the root cause fast and get your line running.
Available 24/7 for Orange County Canyon and Orange County industrial facilities. NFPA 70E compliant procedures on every emergency call.
PLC faults, HMI failures, drive errors, and control circuit problems — Allen-Bradley, Siemens, SEW and more.
We handle ladder logic review, I/O troubleshooting, communication faults, and full PLC programming. One technician for controls and power — not two separate contractors.
VFD fault diagnosis, motor replacement, drive programming, and rotating equipment electrical repair.
We carry common drive parts on the truck and work on most major brands. Power quality analysis included when drive failures are recurring.
Motor control center repair, breaker replacement, bucket rebuilds, panel upgrades, and switchgear service.
We handle load calculations, permit coordination with the Orange County Building Division, and Title 24 compliance documentation for panel upgrades and new installs.
New equipment hookups, relocations, conveyor systems, and production line electrical installs done right.
From single machine connections to full production line buildouts, we handle the electrical scope start to finish. No sub-contractors, no handoffs.
EPM programs, IR inspections, arc flash studies, and transformer service that prevent the 2am phone call.
Custom-built maintenance schedules for Orange County manufacturing facilities. Includes infrared thermal imaging reports, arc flash hazard documentation, and NFPA 70E safety audits.
Why Direct Source
Call before noon and we'll have eyes on your Orange County facility today — not next week. Most contractors make you wait days for a walkthrough.
Most electricians stop at the panel. We handle the motor, the drive, the PLC, and the pump too — no finger-pointing between trades.
Santa Fe Springs headquarters puts us minutes from Orange County and the entire Orange County manufacturing belt.
We work plants, warehouses, and processing facilities exclusively. Your facility isn't a side job between house calls.
How It Works
We cut out the back-and-forth. You call, we respond same day, you get a straight answer on what it costs and how long it takes. No runaround.
Tell us what's down or what you need. A real person responds — fast.
We get eyes on the problem today, by phone or on-site at your Orange County facility.
Straight answers on what it takes to fix it — scope, timeline, cost.
Our own crews do the work — electrical, mechanical, and controls.
Who We Serve
Orange County's industrial economy runs across aerospace, food production, logistics, and electronics manufacturing. Every sector has its own electrical demands. We know them all.
Oil and gas support facilities, compressor stations, and processing operations in Southern California require electrical contractors who understand hazardous location wiring, Class I Division standards, and the documentation those environments demand. We handle instrumentation power, motor controls, and emergency electrical for these facilities.
Metal fabrication shops and finishing operations run heavy equipment — welders, CNC machines, electroplating lines, and ventilation systems — that place serious demands on electrical infrastructure. We handle high-amperage panel work, equipment wiring, and motor drive replacements for fabrication facilities throughout Orange County and Orange County.
Orange County Canyon hosts a concentration of aerospace suppliers and defense subcontractors with strict documentation and quality requirements. We provide electrical installation, control system work, and maintenance programs that meet the standards these facilities demand — clean, documented, and done right the first time.
Food and beverage facilities in Orange County run wash-down environments, refrigeration systems, and continuous production lines that cannot tolerate unplanned downtime. We handle motor and drive failures, panel work, and electrical installs with the sanitation and safety standards these operations require.
With access to I-5, SR-91, and SR-57, Orange County is a major distribution hub. Warehouse and distribution facilities need reliable conveyor electrical, lighting systems, and dock equipment wiring. We support distribution operations of all sizes with fast response and minimal disruption.
Electronics assembly and general manufacturing in Orange County run precise, automated processes that depend on clean power and reliable controls. We troubleshoot automation faults, upgrade aging electrical infrastructure, and provide preventive maintenance programs that keep production running on schedule.
Cold storage facilities operate compressors, evaporators, and refrigeration equipment around the clock. Electrical faults in these environments are not just costly — they can mean product loss. We respond fast, diagnose correctly, and fix it the same day when possible.
Plastics and packaging operations in Orange County rely on injection molding machines, extruders, and packaging lines that demand consistent power and responsive controls. We handle VFD replacements, machine wiring, and controls work for these facilities across Orange County.
What Clients Say
“We were experiencing electrical and PLC problems at our manufacturing plant and needed help ASAP. Direct Source came in the same day, gave us a very fair estimate, found the problem, and fixed it. We got back up and running with little downtime. These guys know what they're doing.”
“We had an unexpected production issue at our facility in Orange County and Direct Source responded quickly. Their industrial electrician team diagnosed the problem fast and got us back up and running the same day. Professional and dependable.”
“They were professional and prompt, diagnosed the issue quickly, and fixed it at no charge since it was an easy fix. That type of customer service goes a long way in showing how they operate. They will be our FIRST call for the next electrical need.”
Serving Orange County, CA
Orange County’s industrial base runs through Anaheim Canyon, Fullerton’s Raymond Avenue corridor, Santa Ana’s manufacturing districts, and the logistics and distribution parks lining the 57, 91, and 5 freeways. Food processing, cold storage, aerospace suppliers, electronics assembly, plastics, and warehousing operate 24/7 across the county. These facilities don’t call a general electrician when a VFD faults or a panel trips mid-shift — they need an industrial contractor who knows the equipment and can fix it on the same call.
Direct Source serves Orange County industrial facilities from our Santa Fe Springs headquarters — positioned at the LA — OC border for fast response across the county. Our technicians work industrial every day — motor controls, drives, PLCs, MCC work, panel upgrades, and emergency electrical service for manufacturers, food processors, cold storage operations, and distribution centers throughout Orange County. Title 24 compliant, NFPA 70E procedures on every job. We also serve Anaheim, Fullerton, Irvine, and Santa Ana. Zip codes served: 92601–92899.
Submit below and our team will reach out today.
FAQ
Direct Source is headquartered in Santa Fe Springs, close to Orange County’s industrial zones. For most Orange County facilities (92601–92899) we’re often on-site within 1–2 hours. For emergencies, we respond 24/7, 365 days a year.
We offer emergency troubleshooting, PLC & controls repair, VFD & motor repair, MCC & panel repair, machine and equipment wiring, arc flash studies, and preventive maintenance programs — all for industrial and manufacturing facilities in Orange County, CA.
Yes. Our team troubleshoots and repairs PLCs, VFDs, HMIs, and drives — Allen-Bradley, Siemens, and SEW brands — alongside power distribution, motors, and mechanical systems. One contractor for the whole problem.
It means we get eyes on your problem the day you call — by phone with a qualified technician, or on-site when needed. You won’t wait days just to talk to someone who actually understands industrial systems.
Yes. We build custom EPM programs — infrared inspections, transformer service, arc flash studies, and scheduled maintenance — designed to prevent unplanned downtime at Orange County manufacturing facilities.
We’re primarily industrial — manufacturing plants, processing facilities, warehouses, heavy industrial operations. We do take on some commercial work depending on the scope, but we don’t do residential. Not sure if your project fits? Just call us.
Yes — fully licensed and insured for industrial electrical work throughout California, including Orange County and all of Orange County. CA C10 License #1008512. Documentation available on request.
Call now for a same-day consultation in Orange County, or submit the form and we'll reach out today.
